Vodič za resetiranje specifičan za model
Epson ET-2813 Reset Waste Ink Counter
If your Epson ET-2813 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Before resetting Epson ET-2813
Waste ink produced by cleaning cycles is collected inside the printer. Epson ET-2813 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Epson ET-2813. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Reset the counter in Epson ET-2813
Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.
-
Instalirajte izvorni upravljački program
Install the official Epson driver for ET-2813 and confirm that Windows can see the printer.
-
Povežite izravno putem USB-a
Connect Epson ET-2813 to the computer without Wi-Fi, a hub or an adapter.
-
Pokrenite Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2813.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i ostavite pisač povezan do završetka postupka.
If Epson ET-2813 is not detected
- Povežite pisač izravno s računalom. Nemojte koristiti Wi-Fi, USB razdjelnik, priključnu stanicu ni poslužitelj za ispis.
- Obrišite pauzirane zadatke ispisa i ponovno pokrenite pisač i Windows ako neki drugi program zauzima USB vezu.
- Install the original Epson driver for ET-2813; a generic Windows driver may not expose the required communication interface.
- Pokrenite Wic Reset Connect kao administrator i tijekom cijele provjere održavajte aktivnu internetsku vezu.
Epson ET-2813 reset FAQ
Can I reset Epson ET-2813 over Wi-Fi?
Ne. Wic Reset Connect zahtijeva izravnu USB vezu s računalom sa sustavom Windows.
Does Epson ET-2813 need service mode?
Ne. Pisači Epson ne koriste sekvencu servisnog načina rada Canon. Povežite pisač uobičajeno putem USB-a.
Čisti li se resetiranjem spremnik s tintom ili se on zamjenjuje?
Ne. Mijenja se pohranjena vrijednost brojača. Pregledajte, očistite ili zamijenite fizički sustav za otpadnu tintu kada to njegovo stanje zahtijeva.
Restore Epson ET-2813
Prepare Epson ET-2813, purchase a reset key and return to printing without an unnecessary service visit.