Epson B42WD Waste Ink Counter Reset

When the Epson B42WD reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson B42WD accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson B42WD Stops Printing (Waste Counter Limit)

与 Wic Reset Connect, you can reset the Epson B42WD waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

典型标志

• 打印机即使有墨水也拒绝打印
• 爱普生状态监视器显示维护警告
• 闪烁的灯光和受阻的工作
• 设备被锁定，直到执行重置

Epson B42WD Ink Pad Counter Reset – Quick Steps

1. 步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson B42WD via USB (Wi-Fi reset is not supported).
2. 步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson B42WD is detected.
3. 步骤 3： 粘贴重置密钥，点击 重置, and after completion power-cycle Epson B42WD.

Most Epson B42WD waste counter resets finish in ~1–2 minutes.

开始之前

• 需要 USB 连接（不支持 Wi-Fi 重置）
• Windows 7/8/10/11 电脑
• 重置期间稳定的互联网连接
• 有效 Wic 复位连接复位键

如果检测不到打印机

• 使用直接 USB 连接（避免使用集线器）。.
• 关闭 Epson 状态监视器或其他打印机实用程序。.
• 如果验证失败，则暂时禁用 VPN/代理。.
• 试试另一条 USB 电缆（有些电缆只能充电）。.
• 重新启动打印机和电脑，然后再试一次。.

常见问题