Model-specific reset guide
Epson B42WD Reset Waste Ink Counter
A waste ink counter warning can prevent Epson B42WD from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
What the Epson B42WD service message means
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson B42WD, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson B42WD. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson B42WD
Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.
-
Install the original driver
Install the official Epson driver for B42WD and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson B42WD to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson B42WD.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson B42WD is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for B42WD; a generic Windows driver may not expose the required communication interface.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson B42WD reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson B42WD over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson B42WD
A direct USB connection, the correct driver and a valid key are all you need to reset Epson B42WD.