特定型号重置指南
Epson Artisan 720 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson Artisan 720 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Understanding the Epson Artisan 720 waste ink warning
Waste ink produced by cleaning cycles is collected inside the printer. Epson Artisan 720 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson Artisan 720. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson Artisan 720
请按顺序完成这些步骤。直接 USB 连接以及原始 Epson 驱动程序对于实现可靠通信至关重要。.
-
安装原始驱动程序
Install the official Epson driver for Artisan 720 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson Artisan 720 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson Artisan 720.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson Artisan 720 is not detected
- Install the original Epson driver for Artisan 720; a generic Windows driver may not expose the required communication interface.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
Epson Artisan 720 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Can I reset Epson Artisan 720 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.