Epson Artisan 720 Waste Ink Counter Reset

If your Epson Artisan 720 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson Artisan 720 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson Artisan 720 Show ‘Service Required’?

S Wic Reset Connect, you can reset the Epson Artisan 720 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Tipični znakovi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Step-by-Step: Epson Artisan 720 Waste Counter Reset

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson Artisan 720 directly. Keep Internet enabled for validation.
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson Artisan 720 is detected.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson Artisan 720 to finalize.

Most Epson Artisan 720 waste counter resets finish in ~1–2 minutes.

Sistemski zahtjevi

• Windows 7/8/10/11 PC
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
• Valjani Wic resetni ključ za povezivanje
• Stabilna internetska veza tijekom resetiranja

Uobičajena rješenja

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.

Često postavljana pitanja