Canon MG8140 Ink Absorber Full Reset

The “Ink Absorber Full” / service required message on Canon MG8140 is common after many cleaning cycles. In most cases, a counter reset restores printing.

During head cleaning, surplus ink is routed to internal absorber pads. Canon MG8140 monitors this via a counter and can lock printing at a threshold.

This page is prepared for Canon MG8140. Service mode instructions are shown only when a matching series procedure is known.

典型标志

• 屏幕或驾驶员显示维修/保养警告
• 打印机即使有墨水也拒绝打印
• 闪烁的指示灯和排队作业失败
• 重新启动后错误再次出现

How to Enter Service Mode on Canon MG8140

某些佳能系列需要进入维修模式后才能重置吸墨器计数器。.

1. 打开打印机 关闭.
2. 按住 停止/重置.
3. 在按住停止/复位的同时，按住 电源.
4. 发布 停止/重置 (继续保持动力）。.
5. 新闻 停止/重置 6次.
6. 发布 电源 - 打印机应进入服务模式。.

如果不起作用，请仔细重复上述步骤。按压次数取决于系列。.

清除墨水吸收器/废墨计数器

Once the counter is cleared, Canon MG8140 should exit the locked state and printing should resume normally.

维护提醒

如果吸收垫确实饱和，忽视维护可能会导致打印机内部漏墨。计数器重置只能消除软件锁。.

重置工具和说明

为了达到最佳效果，请避免匆忙按下按钮--时间的一致性很重要。.