Model-specific reset guide
Đặt lại bộ đếm mực thải trên máy in Epson WorkForce 320
Epson WorkForce 320 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Why Epson WorkForce 320 stops printing
Waste ink produced by cleaning cycles is collected inside the printer. Epson WorkForce 320 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson WorkForce 320. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson WorkForce 320
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for WorkForce 320 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson WorkForce 320 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WorkForce 320.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson WorkForce 320 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson WorkForce 320 reset FAQ
Does Epson WorkForce 320 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson WorkForce 320 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson WorkForce 320
Complete the Epson WorkForce 320 counter reset with Wic Reset Connect and assistance whenever you need it.