Model-specific reset guide
Epson SX405 Reset Waste Ink Counter
When Epson SX405 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
What the Epson SX405 service message means
An ink pad message is a maintenance safeguard. It indicates that Epson SX405 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson SX405. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson SX405
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for SX405 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson SX405 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson SX405.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson SX405 is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Install the original Epson driver for SX405; a generic Windows driver may not expose the required communication interface.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson SX405 reset FAQ
Can I reset Epson SX405 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson SX405 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson SX405
Follow the verified sequence for Epson SX405, then restart the printer and continue your work.