Epson Photo 1290 Ink Pad Counter Reset Guide

Epson Photo 1290 Waste Ink Counter Reset

The Epson Photo 1290 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson Photo 1290 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson Photo 1290 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson Photo 1290 waste counter reset in minutes.

Three Steps to Restore Epson Photo 1290 Printing

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson Photo 1290 directly. Keep Internet enabled for validation.
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson Photo 1290 is detected.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson Photo 1290.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson Photo 1290 waste counter resets finish in ~1–2 minutes.

System Requirements

  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson Photo 1290 – Waste Ink Counter Reset using Wic Reset Connect.

Giỏ hàng