Model-specific reset guide
Đặt lại bộ đếm mực thải trên máy in Epson L5190
If your Epson L5190 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Why the ink pad counter blocks Epson L5190
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson L5190, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson L5190. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson L5190
Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.
-
Install the original driver
Install the official Epson driver for L5190 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson L5190 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L5190.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson L5190 is not detected
- Install the original Epson driver for L5190; a generic Windows driver may not expose the required communication interface.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
Epson L5190 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Can I reset Epson L5190 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson L5190
A direct USB connection, the correct driver and a valid key are all you need to reset Epson L5190.