Model-specific reset guide
Epson L358 Reset Waste Ink Counter
Epson L358 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
The counter behind the Epson L358 warning
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson L358 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson L358. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson L358
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for L358 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson L358 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L358.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson L358 is not detected
- Install the original Epson driver for L358; a generic Windows driver may not expose the required communication interface.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson L358 reset FAQ
Does Epson L358 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Can I reset Epson L358 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson L358
Ready to restore Epson L358? Check the requirements once more and start the guided reset.