Model-specific reset guide
Скидання лічильника відпрацьованого чорнила Epson XP-810
Epson XP-810 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Before resetting Epson XP-810
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson XP-810 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-810. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-810
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for XP-810 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-810 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-810.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-810 is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for XP-810; a generic Windows driver may not expose the required communication interface.
Epson XP-810 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson XP-810 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson XP-810
Prepare Epson XP-810, purchase a reset key and return to printing without an unnecessary service visit.