Model-specific reset guide
Скидання лічильника відпрацьованого чорнила Epson XP-700
If your Epson XP-700 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
The counter behind the Epson XP-700 warning
An ink pad message is a maintenance safeguard. It indicates that Epson XP-700 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-700. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-700
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for XP-700 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-700 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-700.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-700 is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson XP-700 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does Epson XP-700 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Can I reset Epson XP-700 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson XP-700
Follow the verified sequence for Epson XP-700, then restart the printer and continue your work.