Epson TX125 Waste Ink Counter Reset

Epson TX125 Waste Ink Counter Reset

The Epson TX125 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson TX125 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson TX125 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson TX125 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson TX125 Waste Counter Reset

  1. Крок 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX125 via USB (Wi-Fi reset is not supported).
  2. Крок 2: Run Wic Reset Connect as Administrator and confirm Epson TX125 is detected.
  3. Крок 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson TX125.
Buy Reset Key ⬇️ Download Wic Reset Connect Інструкції

Most Epson TX125 waste counter resets finish in ~1–2 minutes.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson TX125 – Waste Ink Counter Reset using Wic Reset Connect.

Кошик для покупок