Model-specific reset guide
Penghitung Tinta Limbah Epson TX125 Reset
Epson TX125 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
The counter behind the Epson TX125 warning
An ink pad message is a maintenance safeguard. It indicates that Epson TX125 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson TX125. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson TX125
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for TX125 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson TX125 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX125.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson TX125 is not detected
- Install the original Epson driver for TX125; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson TX125 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does Epson TX125 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson TX125
Use the model-specific steps above to reset Epson TX125 with a stable connection and a valid key.