Fix Epson M100 Service Required – Waste Counter Reset

Epson M100 Waste Ink Counter Reset

If your Epson M100 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson M100 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson M100 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson M100 waste counter reset in minutes.

Three Steps to Restore Epson M100 Printing

  1. Крок 1: Use a Windows PC (7–11) with Internet access. Connect Epson M100 via USB (Wi-Fi reset is not supported).
  2. Крок 2: Run Wic Reset Connect as Administrator and confirm Epson M100 is detected.
  3. Крок 3: Use the key to reset the counter, wait for completion, then restart Epson M100 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Інструкції

Most Epson M100 waste counter resets finish in ~1–2 minutes.

What You Need

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson M100 – Waste Ink Counter Reset using Wic Reset Connect.

Кошик для покупок