Model-specific reset guide

Epson L3107 Reset Waste Ink Counter

A waste ink counter warning can prevent Epson L3107 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.

Кнопка скидання$8,00
Instant email deliveryТехнічна підтримка включенаReplacement key after a failed reset
The problem

The counter behind the Epson L3107 warning

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson L3107 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

Wic Reset Connect is designed to reset the compatible counter in Epson L3107. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
Кнопка скиданняFor this operation
Step by step

Reset the counter in Epson L3107

Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.

  1. Install the original driver

    Install the official Epson driver for L3107 and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson L3107 to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3107.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: A successful reset is finalized by switching Epson L3107 off and on. The printer should then accept jobs normally.
If Epson L3107 is not detected
  • Install the original Epson driver for L3107; a generic Windows driver may not expose the required communication interface.
  • Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
  • Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
  • Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.

Open full instructions

Common questions

Epson L3107 reset FAQ

How long does the reset take?

The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.

Can I reset Epson L3107 over Wi-Fi?

No. Wic Reset Connect requires a direct USB connection to the Windows computer.

Does Epson L3107 need service mode?

No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.

Reset with confidence

Restore Epson L3107

Complete the Epson L3107 counter reset with Wic Reset Connect and assistance whenever you need it.

Reset key: $8,00
Кошик
Виберіть валюту