Model-specific reset guide
Скидання лічильника відпрацьованого чорнила Epson EW-M660FT
When Epson EW-M660FT reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Why the ink pad counter blocks Epson EW-M660FT
Epson EW-M660FT uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson EW-M660FT. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson EW-M660FT
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for EW-M660FT and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson EW-M660FT to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EW-M660FT.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson EW-M660FT is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for EW-M660FT; a generic Windows driver may not expose the required communication interface.
Epson EW-M660FT reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Can I reset Epson EW-M660FT over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson EW-M660FT
Ready to restore Epson EW-M660FT? Check the requirements once more and start the guided reset.