Model-specific reset guide
Canon TS3395 Ink Absorber Full Reset
If Canon TS3395 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
The waste ink counter inside Canon TS3395
Waste ink is routed away from the print head and retained inside the printer. The firmware in Canon TS3395 calculates usage and may stop new jobs to reduce overflow risk.
Wic Reset Connect is designed to reset the compatible counter in Canon TS3395. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TS3395
- Turn the printer off.
- Натисніть і утримуйте Зупинка/Сброс.
- Утримуючи кнопку Стоп/Сброс, натисніть і утримуйте Влада.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 разів.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TS3395
Service mode must be entered correctly before Wic Reset Connect can communicate with the maintenance interface. Resolve other printer errors first.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TS3395 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TS3395 is not detected
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
Canon TS3395 reset FAQ
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Does Canon TS3395 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon TS3395
Wic Reset Connect combines a guided reset with support if Canon TS3395 does not respond as expected.