Model-specific reset guide
Canon MP235 Ink Absorber Full Reset
If Canon MP235 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
Understanding the Canon MP235 ink absorber warning
Waste ink is routed away from the print head and retained inside the printer. The firmware in Canon MP235 calculates usage and may stop new jobs to reduce overflow risk.
Wic Reset Connect is designed to reset the compatible counter in Canon MP235. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MP235
- Turn the printer off.
- Натисніть і утримуйте Зупинка/Сброс.
- Утримуючи кнопку Стоп/Сброс, натисніть і утримуйте Влада.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 2 рази.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MP235
Prepare Canon MP235 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MP235 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MP235 is not detected
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Connect Canon MP235 directly to the computer and try another data-capable USB cable or port.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
Canon MP235 reset FAQ
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Скільки разів потрібно натиснути Stop/Reset?
For Canon MP235, use 2 Stop/Reset presses in the sequence shown on this page.
Restore Canon MP235
Prepare Canon MP235, enter service mode and complete the reset with a valid Wic Reset Connect key.