Epson WF-2650 Waste Ink Counter Reset

The Epson WF-2650 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-2650 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson WF-2650 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson WF-2650 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Three Steps to Restore Epson WF-2650 Printing

1. Adım 1: Connect Epson WF-2650 to a Windows computer with a stable Internet connection using a USB cable.
2. Adım 2: Start Wic Reset Connect in Administrator mode and wait until Epson WF-2650 appears in the device list.
3. Adım 3: Paste the reset key, click Reset, and after completion power-cycle Epson WF-2650.

Most Epson WF-2650 waste counter resets finish in ~1–2 minutes.

System Requirements

• Stable Internet connection during reset
• Windows 7/8/10/11 PC
• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)

Troubleshooting

• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).
• Restart printer and PC, then try again.
• Temporarily disable VPN/proxy if validation fails.
• Run the app as Administrator.

FAQ