Model-specific reset guide
Epson WorkForce 845 Reset Waste Ink Counter
The service-required message on Epson WorkForce 845 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Why Epson WorkForce 845 stops printing
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson WorkForce 845 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson WorkForce 845. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson WorkForce 845
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for WorkForce 845 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson WorkForce 845 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WorkForce 845.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson WorkForce 845 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson WorkForce 845 reset FAQ
Does Epson WorkForce 845 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson WorkForce 845
A direct USB connection, the correct driver and a valid key are all you need to reset Epson WorkForce 845.