Fix Epson L3253 Service Required – Waste Counter Reset

Epson L3253 Waste Ink Counter Reset

If your Epson L3253 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3253 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson L3253 Show ‘Service Required’?

Most Epson L3253 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson L3253 Printing

  1. Steg 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3253 via USB (Wi-Fi reset is not supported).
  2. Steg 2: Run Wic Reset Connect as Administrator and confirm Epson L3253 is detected.
  3. Steg 3: Paste the reset key, click Reset, and after completion power-cycle Epson L3253.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson L3253 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson L3253 – Waste Ink Counter Reset using Wic Reset Connect.

Kundvagn