Model-specific reset guide

Epson L3161 Reset Waste Ink Counter

Epson L3161 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.

Återställningsnyckel$8,00
Instant email deliveryTeknisk support ingårReplacement key after a failed reset
The problem

The counter behind the Epson L3161 warning

Waste ink produced by cleaning cycles is collected inside the printer. Epson L3161 tracks those cycles electronically and can stop printing when the calculated limit is reached.

Wic Reset Connect is designed to reset the compatible counter in Epson L3161. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
ÅterställningsnyckelFor this operation
Step by step

Reset the counter in Epson L3161

Start with the connection checks below, then run the reset without opening other printer programs during the process.

  1. Install the original driver

    Install the official Epson driver for L3161 and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson L3161 to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3161.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: Finish by closing Wic Reset Connect and restarting Epson L3161. A short power-off interval lets the printer reload the updated counter value.
If Epson L3161 is not detected
  • Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
  • Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
  • Install the original Epson driver for L3161; a generic Windows driver may not expose the required communication interface.
  • Try another USB port and a known data-capable USB cable if the printer is not detected.

Open full instructions

Common questions

Epson L3161 reset FAQ

How long does the reset take?

The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.

Can I reset Epson L3161 over Wi-Fi?

No. Wic Reset Connect requires a direct USB connection to the Windows computer.

Does the reset clean or replace the ink pads?

No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.

Reset with confidence

Restore Epson L3161

Prepare Epson L3161, purchase a reset key and return to printing without an unnecessary service visit.

Reset key: $8,00
Varukorg
Välj din valuta