Model-specific reset guide
Epson EP-804AR Reset Waste Ink Counter
A waste ink counter warning can prevent Epson EP-804AR from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
What the Epson EP-804AR service message means
Epson EP-804AR uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson EP-804AR. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson EP-804AR
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for EP-804AR and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson EP-804AR to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EP-804AR.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson EP-804AR is not detected
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson EP-804AR reset FAQ
Can I reset Epson EP-804AR over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does Epson EP-804AR need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson EP-804AR
Ready to restore Epson EP-804AR? Check the requirements once more and start the guided reset.