Epson EP-707A Waste Ink Counter Reset

The Epson EP-707A is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson EP-707A accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson EP-707A Ink Pad Counter Warning?

Most Epson EP-707A waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson EP-707A Waste Ink Counter in 3 Steps

Steg 1: Prepare a Windows PC + USB cable and connect Epson EP-707A directly. Keep Internet enabled for validation.
Steg 2: Start Wic Reset Connect in Administrator mode and wait until Epson EP-707A appears in the device list.
Steg 3: Paste the reset key, click Reset, and after completion power-cycle Epson EP-707A.

Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson EP-707A waste counter resets finish in ~1–2 minutes.

Common Fixes

Try another USB cable (some cables are charge-only).
Run the app as Administrator.
Temporarily disable VPN/proxy if validation fails.
Close Epson Status Monitor or other printer utilities.
Use a direct USB connection (avoid hubs).

FAQ

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson EP-707A – Waste Ink Counter Reset using Wic Reset Connect.