Epson C58 Waste Ink Counter Reset

If your Epson C58 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson C58 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson C58 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson C58 waste counter reset in minutes.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Epson C58 Ink Pad Counter Reset – Quick Steps

1. Steg 1: Connect Epson C58 to a Windows computer with a stable Internet connection using a USB cable.
2. Steg 2: Start Wic Reset Connect in Administrator mode and wait until Epson C58 appears in the device list.
3. Steg 3: Paste the reset key, click Reset, and after completion power-cycle Epson C58.

Most Epson C58 waste counter resets finish in ~1–2 minutes.

What You Need

• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key

If the Printer Is Not Detected

• Run the app as Administrator.
• Try another USB cable (some cables are charge-only).
• Restart printer and PC, then try again.
• Close Epson Status Monitor or other printer utilities.
• Use a direct USB connection (avoid hubs).

FAQ