Epson BX305FW Waste Ink Counter Reset

The Epson BX305FW is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson BX305FW uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson BX305FW Ink Pad Counter Warning?

Most Epson BX305FW waste ink counter locks are solved by a software counter reset. Wic Reset Connect ger en okomplicerad procedur.

Three Steps to Restore Epson BX305FW Printing

1. Steg 1: Use a Windows PC (7–11) with Internet access. Connect Epson BX305FW via USB (Wi-Fi reset is not supported).
2. Steg 2: Öppna Wic Reset Connect with admin privileges and verify device recognition for Epson BX305FW.
3. Steg 3: Use the key to reset the counter, wait for completion, then restart Epson BX305FW to finalize.

Most Epson BX305FW waste counter resets finish in ~1–2 minutes.

Vad du behöver

• Windows 7/8/10/11 PC
• Giltig Wic Reset Anslut återställningsknapp
• USB-anslutning krävs (Wi-Fi-återställning stöds inte)
• Stabil internetanslutning under återställning

Vanliga korrigeringar

• Prova en annan USB-kabel (vissa kablar är endast laddningsbara).
• Stäng Epson Status Monitor eller andra skrivarverktyg.
• Starta om skrivaren och datorn och försök sedan igen.
• Inaktivera VPN/proxy tillfälligt om valideringen misslyckas.
• Använd en direkt USB-anslutning (undvik hubbar).

VANLIGA FRÅGOR