Epson L1256 Waste Ink Counter Reset

The Epson L1256 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L1256 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L1256 Ink Pad Counter Warning?

Most Epson L1256 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Step-by-Step: Epson L1256 Waste Counter Reset

1. Step 1: Prepare a Windows PC + USB cable and connect Epson L1256 directly. Keep Internet enabled for validation.
2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson L1256 is detected.
3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson L1256.

Most Epson L1256 waste counter resets finish in ~1–2 minutes.

Before You Begin

• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)

If the Printer Is Not Detected

• Temporarily disable VPN/proxy if validation fails.
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Close Epson Status Monitor or other printer utilities.
• Try another USB cable (some cables are charge-only).