Epson XP-333 Waste Ink Counter Reset

If your Epson XP-333 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson XP-333 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson XP-333 Show ‘Service Required’?

Most Epson XP-333 waste ink counter locks are solved by a software counter reset. Wic Reset Connect omogoča enostaven postopek.

Epson XP-333 Ink Pad Counter Reset – Quick Steps

1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson XP-333 via USB (Wi-Fi reset is not supported).
2. 2. korak: Odpri Wic Reset Connect with admin privileges and verify device recognition for Epson XP-333.
3. 3. korak: Vnesite ključ za ponastavitev in pritisnite Ponastavitev. Wait ~1–2 minutes, then restart Epson XP-333.

Most Epson XP-333 waste counter resets finish in ~1–2 minutes.

Sistemske zahteve

• Stabilna internetna povezava med ponastavitvijo
• Zahtevana je povezava USB (ponastavitev Wi-Fi ni podprta)
• Windows 7/8/10/11 PC
• Veljavna ponastavitev Wic Povežite tipko za ponastavitev

Če tiskalnik ni zaznan

• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
• Aplikacijo zaženite kot skrbnik.
• Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
• Ponovno zaženite tiskalnik in računalnik ter poskusite znova.
• Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).

POGOSTA VPRAŠANJA