Epson XP-332 Waste Ink Counter Reset

If your Epson XP-332 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson XP-332 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson XP-332 Stops Printing (Waste Counter Limit)

Servisni obisk pogosto ni potreben. Wic Reset Connect allows a safe Epson XP-332 waste counter reset in minutes.

Kako se pojavi napaka

• ‘Sporočilo ’Service Required" / življenjska doba v gonilniku ali pripomočku
• Koda za vzdrževanje/podporo (razlikuje se glede na model/voznik)
• Tiskanje se ustavi po ciklih čiščenja
• Opozorilo se ponovi po ponovnem zagonu tiskalnika

Step-by-Step: Epson XP-332 Waste Counter Reset

1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson XP-332 via USB (Wi-Fi reset is not supported).
2. 2. korak: Začetek Wic Reset Connect in Administrator mode and wait until Epson XP-332 appears in the device list.
3. 3. korak: Use the key to reset the counter, wait for completion, then restart Epson XP-332 to finalize.

Most Epson XP-332 waste counter resets finish in ~1–2 minutes.

Odpravljanje težav

• Ponovno zaženite tiskalnik in računalnik ter poskusite znova.
• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
• Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).
• Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
• Uporabite neposredno povezavo USB (izogibajte se vozliščem).

Pogosto zastavljena vprašanja