Epson WorkForce 321 Waste Ink Counter Reset
If your Epson WorkForce 321 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WorkForce 321 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why Does the Epson WorkForce 321 Show ‘Service Required’?
Most Epson WorkForce 321 waste ink counter locks are solved by a software counter reset. Wic Reset Connect omogoča enostaven postopek.
Epson WorkForce 321 Ink Pad Counter Reset – Quick Steps
- 1. korak: Connect Epson WorkForce 321 to a Windows computer with a stable Internet connection using a USB cable.
- 2. korak: Odpri Wic Reset Connect with admin privileges and verify device recognition for Epson WorkForce 321.
- 3. korak: Prilepite ključ za ponastavitev, kliknite Ponastavitev, and after completion power-cycle Epson WorkForce 321.
Most Epson WorkForce 321 waste counter resets finish in ~1–2 minutes.
Če tiskalnik ni zaznan
- Ponovno zaženite tiskalnik in računalnik ter poskusite znova.
- Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).
- Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
- Aplikacijo zaženite kot skrbnik.
- Uporabite neposredno povezavo USB (izogibajte se vozliščem).
POGOSTA VPRAŠANJA
Ali lahko ponastavitev izvedem prek omrežja Wi-Fi?
Ne. Ponastavitev zahteva povezavo USB z računalnikom Windows.
Koliko časa traja?
Običajno približno 1-2 minuti.
Ali potrebujem servisni center?
Običajno ne za zaklep števca za odpadno črnilo; ponavadi zadostuje ponastavitev.
Kaj če ponastavitev ne deluje?
Preverite kabel/port USB, zaženite ga kot upravitelj in zaprite druge pripomočke za tiskalnik.
Guide prepared for Epson WorkForce 321 – Waste Ink Counter Reset using Wic Reset Connect.