Epson WorkForce 321 Ink Pad Counter Reset Guide

Epson WorkForce 321 Waste Ink Counter Reset

If your Epson WorkForce 321 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WorkForce 321 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson WorkForce 321 Show ‘Service Required’?

Most Epson WorkForce 321 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Epson WorkForce 321 Ink Pad Counter Reset – Quick Steps

Korak 1: Connect Epson WorkForce 321 to a Windows computer with a stable Internet connection using a USB cable.
Korak 2: Otvoreno Wic Reset Connect with admin privileges and verify device recognition for Epson WorkForce 321.
Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson WorkForce 321.

Kupite ključ za resetiranje ⬇️ Preuzmite Wic Reset Connect Upute

Most Epson WorkForce 321 waste counter resets finish in ~1–2 minutes.

Ako se pisač ne detektira

Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
Privremeno onemogućite VPN/proxy ako provjera ne uspije.
Pokrenite aplikaciju kao administrator.
Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).

Često postavljana pitanja

Mogu li resetirati putem Wi-Fi-ja?

Ne. Za resetiranje je potrebna USB veza s računalom s operativnim sustavom Windows.

Koliko dugo traje?

Obično oko 1–2 minute.

Trebam li servisni centar?

Obično nije zbog zaključavanja brojača otpadne tinte; obično je dovoljan reset.

Što ako resetiranje ne uspije?

Provjerite USB kabel/priključak, pokrenite kao administrator i zatvorite ostale uslužne programe za pisač.

Guide prepared for Epson WorkForce 321 – Waste Ink Counter Reset using Wic Reset Connect.