Reset Epson ME-700FW Waste Ink Counter in Minutes

Epson ME-700FW Waste Ink Counter Reset

If your Epson ME-700FW suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-700FW uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson ME-700FW Stops Printing (Waste Counter Limit)

S spletno stranjo Wic Reset Connect, you can reset the Epson ME-700FW waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Pogosti simptomi

‘Sporočilo ’Service Required" / življenjska doba v gonilniku ali pripomočku
Koda za vzdrževanje/podporo (razlikuje se glede na model/voznik)
Tiskanje se ustavi po ciklih čiščenja
Opozorilo se ponovi po ponovnem zagonu tiskalnika

Step-by-Step: Epson ME-700FW Waste Counter Reset

1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson ME-700FW via USB (Wi-Fi reset is not supported).
2. korak: Spustite Wic Reset Connect as Administrator and confirm Epson ME-700FW is detected.
3. korak: Vnesite ključ za ponastavitev in pritisnite Ponastavitev. Wait ~1–2 minutes, then restart Epson ME-700FW.

Nakup ključa za ponastavitev ⬇️ Prenos Wic Ponastavitev povezave Navodila

Most Epson ME-700FW waste counter resets finish in ~1–2 minutes.

Pogosto zastavljena vprašanja

Ali potrebujem servisni center?

Običajno ne za zaklep števca za odpadno črnilo; ponavadi zadostuje ponastavitev.

Ali lahko ponastavitev izvedem prek omrežja Wi-Fi?

Ne. Ponastavitev zahteva povezavo USB z računalnikom Windows.

Kaj če ponastavitev ne deluje?

Preverite kabel/port USB, zaženite ga kot upravitelj in zaprite druge pripomočke za tiskalnik.

Koliko časa traja?

Običajno približno 1-2 minuti.

Guide prepared for Epson ME-700FW – Waste Ink Counter Reset using Wic Reset Connect.