Epson DX7400 Waste Ink Counter Reset

If your Epson DX7400 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson DX7400 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson DX7400 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson DX7400 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson DX7400 Waste Counter Reset

1. 1. korak: Prepare a Windows PC + USB cable and connect Epson DX7400 directly. Keep Internet enabled for validation.
2. 2. korak: Start Wic Reset Connect in Administrator mode and wait until Epson DX7400 appears in the device list.
3. 3. korak: Paste the reset key, click Reset, and after completion power-cycle Epson DX7400.

Most Epson DX7400 waste counter resets finish in ~1–2 minutes.

System Requirements

• Stable Internet connection during reset
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key

If the Printer Is Not Detected

• Try another USB cable (some cables are charge-only).
• Run the app as Administrator.
• Close Epson Status Monitor or other printer utilities.
• Restart printer and PC, then try again.
• Use a direct USB connection (avoid hubs).