Epson DX7400 Waste Ink Counter Reset

If your Epson DX7400 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson DX7400 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson DX7400 Show ‘Service Required’?

S Wic Reset Connect, you can reset the Epson DX7400 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson DX7400 Waste Counter Reset

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson DX7400 directly. Keep Internet enabled for validation.
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson DX7400 appears in the device list.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson DX7400.

Most Epson DX7400 waste counter resets finish in ~1–2 minutes.

Sistemski zahtjevi

• Stabilna internetska veza tijekom resetiranja
• Windows 7/8/10/11 PC
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
• Valjani Wic resetni ključ za povezivanje

Ako se pisač ne detektira

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Pokrenite aplikaciju kao administrator.
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).