Epson CX5900 Waste Ink Counter Reset

The Epson CX5900 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson CX5900 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson CX5900 Waste Ink Counter

Servisni obisk pogosto ni potreben. Wic Reset Connect allows a safe Epson CX5900 waste counter reset in minutes.

Epson CX5900 Ink Pad Counter Reset – Quick Steps

1. 1. korak: Prepare a Windows PC + USB cable and connect Epson CX5900 directly. Keep Internet enabled for validation.
2. 2. korak: Začetek Wic Reset Connect in Administrator mode and wait until Epson CX5900 appears in the device list.
3. 3. korak: Use the key to reset the counter, wait for completion, then restart Epson CX5900 to finalize.

Most Epson CX5900 waste counter resets finish in ~1–2 minutes.

Sistemske zahteve

• Veljavna ponastavitev Wic Povežite tipko za ponastavitev
• Zahtevana je povezava USB (ponastavitev Wi-Fi ni podprta)
• Stabilna internetna povezava med ponastavitvijo
• Windows 7/8/10/11 PC

Odpravljanje težav

• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
• Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).
• Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
• Aplikacijo zaženite kot skrbnik.
• Uporabite neposredno povezavo USB (izogibajte se vozliščem).

POGOSTA VPRAŠANJA