Epson CX4905 Waste Ink Counter Reset

The Epson CX4905 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson CX4905 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson CX4905 Ink Pad Counter Warning?

Most Epson CX4905 waste ink counter locks are solved by a software counter reset. Wic Reset Connect omogoča enostaven postopek.

Reset Epson CX4905 Waste Ink Counter in 3 Steps

1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson CX4905 via USB (Wi-Fi reset is not supported).
2. 2. korak: Spustite Wic Reset Connect as Administrator and confirm Epson CX4905 is detected.
3. 3. korak: Prilepite ključ za ponastavitev, kliknite Ponastavitev, and after completion power-cycle Epson CX4905.

Most Epson CX4905 waste counter resets finish in ~1–2 minutes.

Sistemske zahteve

• Windows 7/8/10/11 PC
• Zahtevana je povezava USB (ponastavitev Wi-Fi ni podprta)
• Veljavna ponastavitev Wic Povežite tipko za ponastavitev
• Stabilna internetna povezava med ponastavitvijo

Odpravljanje težav

• Uporabite neposredno povezavo USB (izogibajte se vozliščem).
• Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
• Ponovno zaženite tiskalnik in računalnik ter poskusite znova.
• Aplikacijo zaženite kot skrbnik.

Pogosto zastavljena vprašanja