Epson XP-950 Ink Pad Counter Reset Guide

Epson XP-950 Waste Ink Counter Reset

The Epson XP-950 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson XP-950 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson XP-950 Ink Pad Counter Warning?

Most Epson XP-950 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson XP-950 Ink Pad Counter Reset – Quick Steps

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson XP-950 directly. Keep Internet enabled for validation.
  2. Krok 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-950.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-950.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson XP-950 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC

Troubleshooting

  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Use a direct USB connection (avoid hubs).
  • Try another USB cable (some cables are charge-only).

Guide prepared for Epson XP-950 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík