Epson XP-334 Waste Ink Counter Reset

When the Epson XP-334 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson XP-334 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson XP-334 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson XP-334 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson XP-334 Waste Ink Counter in 3 Steps

1. Krok 1: Connect Epson XP-334 to a Windows computer with a stable Internet connection using a USB cable.
2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-334 appears in the device list.
3. Krok 3: Use the key to reset the counter, wait for completion, then restart Epson XP-334 to finalize.

Most Epson XP-334 waste counter resets finish in ~1–2 minutes.

Before You Begin

• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key
• Stable Internet connection during reset
• Windows 7/8/10/11 PC

Common Fixes

• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).
• Restart printer and PC, then try again.
• Close Epson Status Monitor or other printer utilities.
• Run the app as Administrator.

Frequently Asked Questions