Reset Epson XP-324 Waste Ink Counter in Minutes

Epson XP-324 Waste Ink Counter Reset

When the Epson XP-324 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-324 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-324 Waste Ink Counter

Most Epson XP-324 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson XP-324 Waste Ink Counter in 3 Steps

  1. Krok 1: Connect Epson XP-324 to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-324.
  3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-324.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson XP-324 waste counter resets finish in ~1–2 minutes.

System Requirements

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson XP-324 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík