Epson WF-3725 Waste Ink Counter Reset
When the Epson WF-3725 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
The Epson WF-3725 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Understanding the Epson WF-3725 Waste Ink Counter
With Wic Reset Connect, you can reset the Epson WF-3725 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Reset Epson WF-3725 Waste Ink Counter in 3 Steps
- Krok 1: Prepare a Windows PC + USB cable and connect Epson WF-3725 directly. Keep Internet enabled for validation.
- Krok 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson WF-3725.
- Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson WF-3725.
Most Epson WF-3725 waste counter resets finish in ~1–2 minutes.
What You Need
- USB connection required (Wi-Fi reset not supported)
- Windows 7/8/10/11 PC
- Valid Wic Reset Connect reset key
- Stable Internet connection during reset
Frequently Asked Questions
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Guide prepared for Epson WF-3725 – Waste Ink Counter Reset using Wic Reset Connect.