Fix Epson TX133 Service Required – Waste Counter Reset

Epson TX133 Waste Ink Counter Reset

When the Epson TX133 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson TX133 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson TX133 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson TX133 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson TX133 Waste Ink Counter in 3 Steps

  1. Krok 1: Connect Epson TX133 to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson TX133 is detected.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson TX133.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson TX133 waste counter resets finish in ~1–2 minutes.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson TX133 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík