Epson SX515W Waste Ink Counter Reset

The Epson SX515W is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson SX515W accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson SX515W Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson SX515W waste counter reset in minutes.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Epson SX515W Ink Pad Counter Reset – Quick Steps

1. Krok 1: Use a Windows PC (7–11) with Internet access. Connect Epson SX515W via USB (Wi-Fi reset is not supported).
2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson SX515W appears in the device list.
3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson SX515W.

Most Epson SX515W waste counter resets finish in ~1–2 minutes.

What You Need

• Windows 7/8/10/11 PC
• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset

Troubleshooting

• Restart printer and PC, then try again.
• Temporarily disable VPN/proxy if validation fails.
• Close Epson Status Monitor or other printer utilities.
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).

FAQ