Fix Epson NX105 Service Required – Waste Counter Reset

Epson NX105 Waste Ink Counter Reset

The Epson NX105 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson NX105 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson NX105 Waste Ink Counter

Most Epson NX105 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Epson NX105 Ink Pad Counter Reset – Quick Steps

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson NX105 directly. Keep Internet enabled for validation.
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson NX105 appears in the device list.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson NX105.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson NX105 waste counter resets finish in ~1–2 minutes.

What You Need

  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)

Troubleshooting

  • Restart printer and PC, then try again.
  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.
  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson NX105 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík