Epson ME-82WD Waste Ink Counter Reset

The Epson ME-82WD is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson ME-82WD accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson ME-82WD Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ME-82WD waste counter reset in minutes.

How the Error Appears

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Epson ME-82WD Ink Pad Counter Reset – Quick Steps

1. Krok 1: Prepare a Windows PC + USB cable and connect Epson ME-82WD directly. Keep Internet enabled for validation.
2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson ME-82WD is detected.
3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson ME-82WD.

Most Epson ME-82WD waste counter resets finish in ~1–2 minutes.

Before You Begin

• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Windows 7/8/10/11 PC

If the Printer Is Not Detected

• Temporarily disable VPN/proxy if validation fails.
• Run the app as Administrator.
• Close Epson Status Monitor or other printer utilities.
• Try another USB cable (some cables are charge-only).
• Restart printer and PC, then try again.