Reset Epson ME-301 Waste Ink Counter in Minutes

Epson ME-301 Waste Ink Counter Reset

The Epson ME-301 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson ME-301 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson ME-301 Waste Ink Counter

Most Epson ME-301 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson ME-301 Waste Ink Counter in 3 Steps

  1. Krok 1: Connect Epson ME-301 to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ME-301.
  3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ME-301.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson ME-301 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson ME-301 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík