Epson L3205 Waste Ink Counter Reset
The Epson L3205 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
A waste ink counter in the Epson L3205 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
What Causes the Epson L3205 Ink Pad Counter Warning?
With Wic Reset Connect, you can reset the Epson L3205 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
How the Error Appears
- Printer refuses to print even with ink available
- Epson Status Monitor shows maintenance warning
- Blinking lights and blocked jobs
- Device is locked until reset is performed
Three Steps to Restore Epson L3205 Printing
- Krok 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3205 via USB (Wi-Fi reset is not supported).
- Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3205 appears in the device list.
- Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L3205.
Most Epson L3205 waste counter resets finish in ~1–2 minutes.
Before You Begin
- USB connection required (Wi-Fi reset not supported)
- Stable Internet connection during reset
- Windows 7/8/10/11 PC
- Valid Wic Reset Connect reset key
Frequently Asked Questions
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Guide prepared for Epson L3205 – Waste Ink Counter Reset using Wic Reset Connect.