Epson L3153 Ink Pad Counter Reset Guide

Epson L3153 Waste Ink Counter Reset

The Epson L3153 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3153 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson L3153 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson L3153 waste counter reset in minutes.

Step-by-Step: Epson L3153 Waste Counter Reset

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson L3153 directly. Keep Internet enabled for validation.
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3153 appears in the device list.
  3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L3153.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson L3153 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson L3153 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík