How to Reset Epson ET-2823 Waste Ink Counter

Epson ET-2823 Waste Ink Counter Reset

If your Epson ET-2823 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson ET-2823 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson ET-2823 Show ‘Service Required’?

Most Epson ET-2823 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson ET-2823 Waste Counter Reset

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson ET-2823 directly. Keep Internet enabled for validation.
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2823 appears in the device list.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-2823.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson ET-2823 waste counter resets finish in ~1–2 minutes.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson ET-2823 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík